Contact Us

Ms.EVANS WANG

0086-571-87830555, 0086-571-87648931

0086-571-87831899, 0086-571-87648932

2015 SHANGHAI AUTO FAIR APRIL 22~29,2015 BOOTH NO.4BE809

 2015 SHANGHAI AUTO FAIR APRIL 22~29,2015 BOOTH NO.4BE809

We Can Offer Clutch Release Bearing

TBC provides various kinds of clutch release bearing, which can be mounted between the clutch and transmission, so as to ensure smooth joint as well as soft separation, reduce wear, and prolong the service life of the clutch and the transmission.Our clutch bearing can be perfectly suitable for automobile with different brands, such as the Honda, Toyota, VW, JETTA, SEAT, AUDI, FIAT, LANCIA, RENAULT, TALBOT, DANCIA, PEUGEOT, CITROEN, ROVER, etc.Since 1997 when we started, we have never stopped the ...

The role of clutch release bearing

Clutch release bearing is an important part of the car, if the maintenance is not good, not only will cause economic losses, but also the disassembly of a very troublesome, need to spend a lot of time.Therefore, it is important to find out the causes of the failure of the clutch release bearing, and the reasonable maintenance and maintenance in the use, to prolong the life of the bearing, improve the labor productivity, and achieve better economic benefits.The clutch release bearing is arranged ...

The working principle of the roller bearing clutch

Roller bearing clutch working principle and tapered thread tightening process is similar, it is arranged according to the spiral angle of the roller replacement of taper thread screw tooth and the formation of the roller bearing clutch, roller in the inner and outer rings of rolling on the road was a right-handed arrangement, when the outer ring in torque starting to reverse the clockwise rotation, through the action of the force of friction drives the roller to rotate, due to the axis of the ro ...

What is the cause of the noise of the tension wheel

The tension wheel is an adjustable tension device which is used to adjust the tightness of the belt. After a period of time after the use of a sound, many people will not care about and continue to use, and finally cause damages to the engine.First of all, to know the reasons for the cause of the tension wheel is mainly because of the iron bead of the tension wheel bearing is broken.If you do not change the tension wheel for a long time,will lead to the loss of a roller bearing, the engine of th ...

The tensioner wheel should be installed near the large belt pulley

The rise of the tensioner belt is a belt transmission device, when the center distance can not be adjusted, can be used to tighten the belt.The tensioner wheel is a belt drive,when the center distance can not be adjusted, can be used to tighten the belt tension.The tensioner wheel is generally arranged in the inner side of the loose side, thereby making the belt only subject to a one-way bending; At the same time to ensure that small wheel angle does not decrease too much, the tension wheel ...

中国
TEL: 0086-571-87830555    FAX: 0086-571-87831899   Email: Factory Address: Shuanpu Industrial Zone. Westlake District, Hangzhou City, Zhejiang Province, China. 310024